Instruction Hologram Light NeoRamen

 

Hologram Sign

 

• The Hologram sign uses CR2032 battery. Due to shipping regulations, we can not include the batteries for some shipping destinations. CR2032 is inexpensive and widely available at hardware stores or online.   
  
  
• Remove the glue dot's cover on the battery base.
  
• Install the battery on top of the glue dot so that the positive side faces down
  
• Put the battery base under the hologram sign so that the arrow is pointing, as shown below. This position is the ON position.
  
  
  
• To turn OFF the light, rotate the battery counter-clockwise. 
  
• To change the battery, remove the battery base and then remove the battery. The glue dot is reusable.